How to Avoid Electrocution at a Construction Site

Before undertaking any new activities in your workplace, you should consider carrying out a risk assessment.


Whether you are a site manager or just working on a construction site, you need to make sure that you are not at risk of electrocution at any time. This is one of the worst incidents we see as a construction accident attorney in New York, but there are things everyone can do to try to reduce the risk of it happening. in the future. Of course, in the worst case scenario where you end up electrocuted, be sure to seek medical help. You will then need to call a construction accident attorney in New York, who can advise you on the best course of action in this situation.

Maintenance of your power tools

Any construction site relies on power tools to complete its job safely and on time. This could include computer equipment to power tools that are used on the job every day. Although most equipment is absolutely safe to use, a construction accident attorney in New York will tell you that they see a fair number of such accidents happening. Employees and visitors need to be protected from this risk, which we help you do today. Any exposed live parts on a tool can cause electric shock. This exposure can be direct or indirect, but both types of electrocution can cause permanent injury and health problems.

Faulty electrical appliances can also cause other problems, which could result in lifelong damage to one of your employees. Site managers are responsible for the protection of their personnel and must regularly check the good condition of all the equipment they use. As a manager, you need to make sure that you test the electricity regularly so that if something needs to be replaced, you can do it quickly before someone gets hurt. Only allow crew members who are familiar with the equipment to use power tools. Otherwise, you will find that you are putting everyone in your organization at risk due to your lack of care.

Be sure to service all of your power tools annually with professional help. You should keep a database that tells you when they were last checked and when their next service is due. It is better to delay work while waiting for service than to force yourself to use faulty equipment.

Take care when cleaning and maintaining equipment

In addition to maintaining the equipment, you should also do your part to check that everything is cleaned regularly. Our team of construction accident attorneys in New York sees many accidents due to laziness of team members. When cleaning this equipment, care must be taken to avoid the risk of electric shock. Make sure everything is turned off at the power source and completely unplugged when in use. It only takes a few seconds to verify, but could be the difference between life and death. Be sure to educate all new members of your team on how to follow these procedures to set a good example on their first day on the job.

Do not mix water and electricity

Current clamp and electrical wires; image by Hobi Industri, via Unsplash.com.

Although it should go without saying, water and electricity should never mix. New York construction accident attorneys are often shocked to learn of accidents involving these two substances, but you’ll want to make sure they never mix on your site. Make sure that anywhere you use electrical equipment is dry and clean so you don’t risk electrocution. Also wear gloves and rubber boots, which can help save you if something goes wrong.

Perform a risk assessment

Before undertaking any new activities in your workplace, you should consider carrying out a risk assessment. Some environments pose a higher risk of electrocution than others, so consider this carefully when setting up a member of your team to perform a new job. Take the time to think about where they will be working and make sure you always have someone on your site to oversee their work. Never leave inexperienced team members to work alone, as that only asks for trouble.

These tips will help you keep your site safe at all times and avoid electrocution. We strongly recommend that you contact a construction accident attorney in New York if you have recently had an accident on your job site. We are used to dealing with electrocutions and we will be happy to guide you through the claim process if you are a victim in your workplace. Make sure you always follow the advice above as an employee, as you also have a responsibility to ensure that you behave properly at all times while on the job. Contact us today for more information or to discuss any questions you have about a claim.

Alice F. Ponder